How To Use

Note: We are currently developing 'How To Use' instructions with more visuals and details for newer products.

ChronoCare Ultimate Watch Cleaner Spray

Step 1: Ensure the crown of your watch is fully closed to protect it from water damage.

Step 2: Shake the bottle of Ultimate Watch Cleaner well before use.

Step 3: Spray the cleaner directly onto the watch from a distance of about 6 inches, covering all parts evenly.

Step 4: Use a soft-bristled brush to gently scrub the watch, focusing on any crevices or between the bracelet links.

Step 5: Rinse the watch under lukewarm running water (only if your watch is water-resistant). If your watch is not water-resistant, use a damp microfiber towel to gently wipe off the cleaner.

Step 6: Dry the watch thoroughly with a clean, dry microfiber or suede towel.

ChronoCare Matte Finish and Renewal Sponge

Step 1: Identify the matte or brushed areas on your watch that need restoration.

Step 2: Gently rub the Renewal Sponge along the grain of the watch's brushed surface, increasing pressure as required. The sponge has dual-grit for precise restoration, suitable for various materials like stainless steel and titanium. It is recommended to start with the high grit side (where the logo is located), followed by the lower grit side to achieve desired brushed effect.

Step 3: Continue using the sponge until you achieve a uniform matte finish. The sponge's abrasive media ensures consistent results without wearing down quickly.

Step 4: After achieving the desired finish, use the Ultimate Watch Cleaner Spray to clean the watch and remove any debris left from the polishing process.

ChronoCare Watch Scratch Repair Polishing Cream

Step 1: Apply a small amount of the polishing cream onto a microfiber cloth or a polishing towel. For smaller, precise areas like the bezel, you can use an ear tip cleaner.

Note: Avoid letting the cream touch the watch crystal or any gems. If this happens, rinse with water, do not remove with a cloth or polishing pad.

Step 2: Gently rub the desired area with slight pressure. Use a gentle, circular motion for even polishing or a back-and-forth motion to specifically address the direction of the scratches. 

Step 3: If deep scratches are present, use the ChronoCare Matte Finish and Renewal Sponge before applying the polishing cream.

Step 4: After polishing, clean the area with the Ultimate Watch Cleaner Spray to remove any polishing residue and enhance the shine.

ChronoCare Watch Leather Strap Cleaner Spray

Step 1: Ensure your leather watch strap is detached from the watch to avoid contact with non-leather parts.

Step 2: Shake the bottle well before use. Hold the bottle approximately 6 inches away from the strap and spray evenly across the leather strap.

Step 3: Allow the spray to sit for a few moments to penetrate and lift dirt and oils.

Step 4: Gently rub the leather strap in a circular motion with a clean, dry microfiber cloth or soft bristle brush.

Step 5: Wipe off excess with a damp cloth and allow the leather strap to air dry completely before reattaching it to your watch.